Low profile lift table U shaped - MSE 20-09-12-U

Lifting tables » Low-profile lifting tables » Low-profile lifting tables galery » MSE 20-09-12-U

LOW-PROFILE LIFTING TABLES

MSE 20-09/12 - U-SHAPED

Improved ergonomics

U-shaped. Stainless steel. Max. load capacity: 2,000 kg. Elevation: 900 mm. Closed height: 100 mm. Top platform size: 1,200 mm x 1,400 mm.

Low-profile lifting table. Built in painted steel with stainless steel top. Max.load: 2,000 kg. Lifting stroke: 900 mm. Closed height: 100 mm. Top platform special size: 1,600 mm x 2,000 mm.

U-shaped. Stainless steel. Max. load capacity: 2,000 kg. Elevation: 900 mm. Closed height: 100 mm. Top platform size: 1,200 mm x 1,400 mm.

Low-profile lifting table. Built in painted steel with stainless steel top. Max.load: 2,000 kg. Lifting stroke: 900 mm. Closed height: 100 mm. Top platform special size: 1,600 mm x 2,000 mm.

CONTACT

ADVANTAGES AND APPLICATIONS

Industrial use.

Raise goods.

Improve ergonomics.

Simplifies load handling.

Increased productivity.

Improve working conditions.

Process optimisation.

Minimises occupational health risks associated with incorrect postures.

Maximum security.

Applications

The MSE 12-09/XX low-profile lifting table is used to improve the working and safety conditions through better ergonomics as operators can always work at the same height.
An ideal solution for streamlining manual palletisation and depalletisation processes in production lines.
Raise trolleys or containers with goods to facilitate their handling.
For industrial use.

Advantages

Their extremely low profile when closed means they can be installed directly on the floor without constructing a pit.
With a lifting stroke of 900 mm, operators can handle loads at the optimal working height.
Connect and operate. Our low-profile lifting tables do not require any installation work.

LOADING/UNLOADING LOW-PROFILE TABLES

CONTROL PANEL

Play

U-shaped.

For loading and unloading with manual pallet jacks, forklift truck or electric stacker.

Play

Operation

Stainless-steel control panel for low-profile lifting tables. Comprised of the hydraulic unit, electrical panel and control buttons.
Our low-profile lifting tables feature raise/lower buttons with hold-to-run operation, located on top of the control panel.
Customers can also select from other modes of operation – automatic photocell system, pedal and push button control panel – so tables can be perfectly adapted to each need.

MODELS
MATERIALS
TECHNICAL CHARACTERISTICS
OPERATION
SAFETY ELEMENTS
CUSTOMISATION

Low-profile lifting tables

Custom manufactured models
Model Top
plataform Max. load
capacity
(kg)(*) Elevation
d
(mm) Width
b
(mm) Length
a
(mm) Closed
height
c
(mm) Motor
MSE-20-09/12-U U-shaped 2,000 900 1,200 1,400 100 1.5 KW

(*) The load must be distributed evenly.

Dimensions

The table width can’t be less than 1,200 mm U-shape 600 mm inner space, to ease the manual pallet jack, forklift truck or electric stacker operation.

We also manufacture lifting tables up to 1,400 mm wide for special pallets or other applications, such as for lifting cages and containers, reaching higher levels or as a height-adjustable workbench.

All our low-profile lifting tables are designed for operation with an evenly distributed load.
Materials
We construct our lifting tables with the materials that best suit each industry and sector.
In stainless steel for damp and/or corrosive environments: food sectors, meat sectors, slaughterhouses, cutting rooms, offal vendors, ham and sausage drying rooms, precooked meals, fish processing, dairy product processing, cheese production, pet food, pharmaceutical sectors, chemical sectors, among others.
In painted steel for dry environments in all industries.
The top platform is made from stainless steel, while the scissors and lower frame are built from painted steel.
Stainless steel

Painted steel
Technical characteristics
The upper platform is built from high-strength steel plate and supported by an upper frame.
The solid steel scissors are extremely robust and reliable.
The lower frame houses the lifting mechanisms and anchors the pivot points for the scissors.
Our lifting tables are operated by an electro-hydraulic system and feature a hydraulic unit, cylinders, hoses and control panel.
All the pivot points incorporate high-performance, self-lubricating and highly durable bronze and Teflon® bearings for frictionless, corrosion-free operation.
IP65-rated push button control panel.
The lifting tables are constructed with a stainless-steel, shear-resistant frame and feature a safety mechanism that stops their descent whenever an obstacle or impediment is detected.
The hydraulic cylinders have an internal safety valve that prevents the table from falling in the event of a leak from a hydraulic hose.
Control with emergency stop button. 24 V operation solenoid valve coils.
Two safety lock-out bars for maintenance purposes.
Operation

The control panel incorporates raise and lower buttons with hold-to-run operation.
Alternatively, our tables can be operated with pedals, a push button control panel or an automatic photocell system.

Raise and lower buttons with hold-to-run operation on top of the control panel.

Raise and lower buttons with hold-to-run operation on top of the control panel.

Play

Optional: automatic photocell operation.

Optional: automatic photocell operation.

Optional: pedal operation.

Optional: pedal operation.

Optional: three-button control panel: raise, lower and emergency stop.

Optional: three-button control panel: raise, lower and emergency stop.

Previous

Next
Safety elements

Our lifting tables are designed and manufactured compliant to Machinery Directive 2006/42/EC and European Standard EN 1570.
They all include the following safety elements as standard, plus some optional ones:

CE marking and rating plate.

CE marking and rating plate.

Play

Stainless-steel, shear-resistant frame which stops its descent if an obstacle is detected.

Stainless-steel, shear-resistant frame which stops its descent if an obstacle is detected.

Control panel with emergency stop button and isolator switch.

Control panel with emergency stop button and isolator switch.

Cylinders with built-in safety valves.

Cylinders with built-in safety valves.

Play

Safety lock-out bars for use during maintenance procedures.

Safety lock-out bars for use during maintenance procedures.

Play

Optional: Safety bellows. Available on 1, 2, 3 or 4 sides.

Optional: Safety bellows. Available on 1, 2, 3 or 4 sides.

Optional: Non-slip diamond plate on upper platform.

Optional: Non-slip diamond plate on upper platform.

Play

Optional: Guardrails with skirting boards and access doors with safety lock-out.

Optional: Guardrails with skirting boards and access doors with safety lock-out.

Previous

Next
Customisation

We can customise our range of lifting tables to optimise their safety and performance based on the end use or application.
Here are just some of the possibilities:

Play

Accessory bar to help relocate low-profile lifting tables.

Accessory bar to help relocate low-profile lifting tables.

Play

Guardrails with skirting boards and access door with safety lock-out.

Guardrails with skirting boards and access door with safety lock-out.

Profile to ensure pallets are positioned correctly and prevent falls.

Profile to ensure pallets are positioned correctly and prevent falls.

Manual roller conveyor for the table’s top platform.

Manual roller conveyor for the table’s top platform.

Adjustable feet to facilitate cleaning.

Adjustable feet to facilitate cleaning.

Floor-mounted feet.

Floor-mounted feet.

Play

Non-slip diamond plate.

Non-slip diamond plate.

Play

Central aperture to accommodate fixed obstacles.

Central aperture to accommodate fixed obstacles.

Previous

Next